Tripod Data Systems CO-OP 41 User Manual page 69

6) Execute the HP function and proceed as normal.
LINE TYPE
Name: Line Type
Purpose: Change the line type that the plotter draws lines
with.
. Keystrokes: [SHIFT] [LINE TYPE)
Entry Conditions: Enter with the new line type in the X-
Reg.
Operation: When executed the CO-OP 41 will change the
type of line that is used for plotting. It will take the line
type specified in the X-Reg. The different line types vary
from plotter to plotter so check your plotter manual to
find what the different line types are.
LINES
Name: Lines
Purpose: Draws lines between either specified points, or
points stored in the Random Pointfile.
Keystrokes:
Entry Conditions: None
Operation: When executed the CO-OP 41 will bring up a
scrolling menu allowing you to select what line you want
to be plotted.
Plotter Module User's Manual 61