High-Speed Modem Transmit Test - OKIDATA OF2600 Service Manual

2.6.05 High-Speed Modem Transmit Test

General Information
This test must be run in conjunction with an unit at a remote location. The remote unit must be set up to
run the High Speed Modem Receive Test before transmission begins.
Procedure
Okifax 2200
1. Press SELECT FUNCTION.
2. Press COPY twice.
3. Press LEFT ARROW twice.
4. Enter "5" from the numeric key pad.
5. Press LEFT ARROW.
The following message will be displayed.
MODEM RATE?
(XXXX) YES ( ¬ ) NO ( ® )
XXXX = Frequency
6. Press RIGHT ARROW until desired frequency appears on the LCD display.
7. Press LEFT ARROW.
8. Press STOP to end the test
9. Press SELECT FUNCTION to exit the test.
Okifax 2400/2600
1. Press SELECT FUNCTION.
2. Press COPY twice.
3. Press LEFT ARROW twice.
4. Enter "07" from the numeric key pad.
5. Press LEFT ARROW.
The following message will be displayed.
Service Guide OF2200/2400/2600
Chapter 2 Failure Analysis
Page: 91