RAP 20D Printer Alarm 3
START
"PRINTER ALARM 3" appears on the LCD display.
Open the cover, then close the cover.
Has the fan motor stopped?
NO
Refer to Action Item 7
YES Is the fan motor connector properly connected to the printer control board?
NO Connect the fan motor connector properly.
YES
Refer to Action Item 8
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OF2200/2400/2600
Chapter 2 Failure Analysis
.
.
Page: 72