2.8.02 Toner Counter Reset
General Information
Reset the Toner Counter whenever a new toner cartridge is installed.
Procedure
To reset this counter, perform the following actions.
NOTE:
The Service Bit (Okifax 2200) or the appropriate bit of the Service Parameter (Okifax 2400/2600) must be
set to ON to reset this counter.
Okifax 2200
1. Press SELECT FUNCTION.
2. Press RIGHT ARROW twice.
3. Enter "8" from the numeric keypad.
4. Press LEFT ARROW.
The following message will be displayed.
1: TONER COUNT CLEAR?
YES ( ¬ ) NO ( ® 1-4)
5. Press LEFT ARROW.
The following message will be displayed.
ARE YOU SURE?
YES ( ¬ ) NO ( ® )
6. Press LEFT ARROW to reset the counter.
7. Press SELECT FUNCTION to exit the procedure.
Okifax 2400/2600
1. Press SELECT FUNCTION.
2. Press One Touch Key 28.
3. Enter "2" from the numeric keypad.
Service Guide OF2200/2400/2600
(Refer to Module 2.9
Chapter 2 Failure Analysis
)
Page: 102