Control Panel Assembly And Paper Guide (U) - OKIDATA OF2600 Service Manual

3.2.09 Control Panel Assembly and Paper Guide (U)

1. Perform procedure
2. Open the control panel assembly.
3. Remove the two screws that retain the ground cables.
4. Remove the two scanner hinges.
5. Detach the control panel cable from connector CN2 of the main control board.
6. Remove the paper guide (u) and the control panel assembly.
7. Remove the two screws on the underside of the control panel assembly and cut the tie wrap.
8. Release the two hooks and remove the control panel assembly.
NOTE:
The longer scanner hinge is on the right side.
P/N 50806301
P/N 50806302
P/N 50105601
Includes all of the items listed below.
P/N N/A
P/N N/A
P/N N/A
P/N 53072001
P/N 51013601
P/N 53071901
P/N 50105611
Includes all of the items listed below.
P/N N/A
P/N N/A
Service Guide OF2200/2400/2600
3.2.02.
Hinge: Scanner (R)
Hinge: Scanner (L)
Panel: Control (Assembly)
Cover: Expanded (B)
Label: Ten-Key
Sheet: Function
Sheet: One-Touch (U)
Guide: Paper Upper
Cover: One-Touch
Panel: Control (Assembly)
Cover: Expanded (B)
Sheet: Function (1)
Chapter 3 Disassembly & Maintenance
2200
2200/2400
2200
2200
2200 RSPL
RSPL
RSPL
2400 RSPL
2200/2400
2400
B.2.10
B.2.10
RSPL B.2.03
B.2.03 , 04
B.2.03
B.2.03
B.2.03
B.2.16
B.2.03 , 04
B.2.04
B.2.03 , 04
B.2.04
Page: 127