Rap 20A Cover Open - OKIDATA OF2600 Service Manual

RAP 20A Cover Open

START
"COVER OPEN" appears on the LCD display.
Close the cover (copy stacker).
Has the problem been resolved?
YES End of procedure.
NO Has the fan motor stopped?
YES Is the cover open switch connector out of position?
NO Check the power supply at CN4, Pins 1, 2, and 3 for +38 vdc.
Refer to Appendix A.
If not present, replace the power supply.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OF2200/2400/2600
YES Connect the cover open switch connector.
NO Refer to Action Item 2.
End of procedure.
Chapter 2 Failure Analysis
Page: 69