High-Speed Modem Receive Test - OKIDATA OF2600 Service Manual

2.6.06 High-Speed Modem Receive Test

General Information
This test must be run in conjunction with an unit at a remote location. The remote unit must be set up to
run the High Speed Modem Transmit Test before transmission begins.
Procedure
Okifax 2200
1. Press SELECT FUNCTION.
2. Press COPY twice.
3. Press LEFT ARROW twice.
4. Enter "6" from the numeric key pad.
5. Press LEFT ARROW.
The following message will be displayed.
MODEM REC. TEST
Rec. / WW / XX YY" ZZZZ
WW = Data Rate
XX = Communication Duration in minutes
YY = Communication Duration in seconds
ZZZZ = Error Count
6. Press STOP to end the test
7. Press SELECT FUNCTION to exit the test.
Okifax 2400/2600
1. Press SELECT FUNCTION.
2. Press COPY twice.
3. Press LEFT ARROW twice.
4. Enter "08" from the numeric key pad.
5. Press RIGHT ARROW until the desired frequency is selected.
6. Press LEFT ARROW.
Service Guide OF2200/2400/2600
Chapter 2 Failure Analysis
Page: 92