3.2.05 Left Side Cover Assembly
1. Perform procedure
2. Open the document stacker cover and the document table.
3. Detach the two pin connector cable from the main control board.
4. Slide the cables from the network control board towards the left side cover until the cables are free.
5. Remove the two screws, then detach the left side cover by lifting it up and outward.
6. Remove the left side cover and cradle assembly.
P/N 53071401
P/N 56630301
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OF2200/2400/2600
3.2.02.
Cover: Side (Left)
Cable: Hook Switch MT-25/DFCU
Chapter 3 Disassembly & Maintenance
RSPL
Page: 123
B.2.02
B.2.17