RAP 17 Multiple Document Feeds
START
Are the leading edges of the documents aligned?
NO Align them.
YES Is the separation rubber dirty?
YES Clean it with water.
NO Does the separation rubber assembly return to its original position
when pushed?
Has the problem been resolved?
YES End of procedure.
NO Clean the ADF roller assembly.
End of procedure.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OF2200/2400/2600
NO Check the ADF spring, the tension arm, and the back-up plate.
YES Replace the separation rubber.
Chapter 2 Failure Analysis
Page: 65