Hardware Upgrades
Removing and Replacing the Removable Hard Drive Cage
2-22
Drive bays 1 through 3 are located in the removable hard drive cage.
This section provides information on how to remove and install the
hard drive cage.
Removing the Removable Hard Drive Cage
To remove the removable hard drive cage
1. Shut down the operating system properly, then turn off the
workstation and any external devices. Disconnect the power cord
from the grounded AC outlet.
2. Remove the workstation access panel. See "Removing the
Workstation Access Panel" in this chapter.
3. Remove the hard drive cage:
a. Remove the torx screws
b. Hold the tab
workstation chassis.
Removing the removable hard drive cage
Compaq Evo Workstation W8000 Hardware Reference Guide
1
on the top of the cage.
2
and pull the cage up and out of the