Removing The Memory Module - Compaq Presario 5UV430 Maintenance And Service Manual

Compaq Presario Internet PC 5000 Series Computers
PRODUCT DESCRIPTION
REMOVAL AND REPLACEMENT PROCEDURES

Removing the Memory Module

ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
GRAPHICS CARD
EXPANSION CARD
(Modem or Network
Card)
1394 CARD
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel -
Open the CD Storage
Door)
TROUBLESHOOTING
JUMPER AND SWITCH INFORMATION
REMOVAL AND REPLACEMENT PROCEDURES
ILLUSTRATED PARTS CATALOG
Removal
Perform the preparation
1.
Pull outward on the release latches
2.
on both ends of the memory module.
Lift the memory module
3.
board slot.
Replacement
Ensure that the latches
1.
the memory modules are pushed to the
outside.
Align the memory module with the memory
2.
slot.
Push the module carefully and firmly into the
3.
slot, ensuring that the latches on both ends
snap into place.
United States
SPECIFICATIONS
procedures.
found
from the system
on both ends of