Removing The Memory Module - Compaq 5000 Series Replacing

R S B
EPLACING THE YSTEM
V. Removing the Memory Module
To remove the memory module, complete the following
procedure:
1. With the computer on its side (open side facing up), locate
the memory module 2 (see Figure 5-1).
2. Press outward on the release latches found at each end of
the memory slot 1. Lift the memory module 2 from the
memory slot 1 (see Figure 5-1). The number of memory
modules may vary depending upon your system's
configuration.
OARD
Figure 5-1
9