Extron electronics ShareLink Pro 2500 User Manual page 71

X79! = Status bar pop‑up timer
= Service (network path of server)
X10^
X10& = Mount point
X10*
= Username
X10( = Password
X11)
= Options
X11! = Boolean for reconnect
= Boolean for extron_share
X11@
= Recursion (optional)
X11#
X11$ = Directory path (optional)
X11*
= IP address
= Subnet mask in CISG
X11(
commands
X12) = Gateway IP address
= Active Learning Mode
X12!
= Receiver display options
X12@
= Hostname or IP address of sender
X12#
X12$ = Hostname or IP address of receiver
= Multicast IP address
X12%
=Encoder multicast interface setting
X12^
X12& = Secure streaming setting
= Port number (must be between 1024 ‑ 65435), Default = 50000
X12*
= Stream type
X12(
= Player state (stopped, paused, playing, unknown)
X13)
X13! = Status Text (for example: OK, cannot access media, unavailable, error)
= Device name (alpha‑numeric client friendly name for an active learning connection)
X13@
= Bluetooth discovery setting
X13#
= Bluetooth mode
X13$
= NIC (Network Interface Card)
X13%
Number
1 s ‑ 300 s in 1 s increments (default = 20 s)
CIFS: "\\\\myServer\\myShare\\myDir"
NFS: "myServer:/myDir"
0 = Disabled 1 = Enabled (default)
Format nnn.nnn.nnn.nnn
Default for LAN A = 192.168.253.254
Default for LAN B = 192.168.254.254
Leading zeros in each of the four octets are optional in setting
values, and are suppressed in returned values.
Prefix representing subnet mask bits (subnet mask value in
CISG commands).
Default = /24, which represents the default subnet mask,
255.255.255.0.
Format nnn.nnn.nnn.nnn
Default = 0.0.0.0
0 = Disable (default)
1 = Encode only
2 = Decode only
3 = Encode and decode
0 = Add as a quadrant (Default)
1 = Overlay
1 = LAN A (Default)
0 = Disable
1 = Enable (Default)
0 = Unicast
1 = Multicast
0 = ShareLink Pro App
1 = Apple Screen Mirroring (AirPlay for iOS/macOS)
0 = Disabled
1 = Enabled (Default)
1 = eth0/LAN A (Default)
ShareLink Pro 2500 • SIS Configuration and Control 63