Extron electronics ShareLink Pro 2500 User Manual page 18

Using the Standby Screen
Once the ShareLink Pro 2500 is connected and powered on, the standby screen appears on the display:
1 1 2 2
Figure 6. Standby Screen
Hostname — Use this hostname to identify and access the ShareLink Pro 2500 during connection.
1
IP address — Use this IP address to identify and access the ShareLink Pro 2500 during connection
2
and to download the ShareLink Pro client software.
Login code — Use this code to connect to the ShareLink Pro 2500 using the software. This code can
3
be customized or disabled via the Product Configuration Software (PCS).
Time — The time format can be adjusted via PCS.
4
NOTE:
• The standby screen background can be changed using PCS. For best results, make sure the
desired background image matches the display output resolution.
• The status bar at the bottom of the standby screen (showing the IP addresses, hostname, and
login code) is overlaid over the background image. Ensure that this portion of the background
image does not contain important information as it will be covered by the status bar.
• The status bar color can also be changed using PCS.
3 3 4 4
ShareLink Pro 2500 • Installation 10