Extron electronics ShareLink Pro 2500 User Manual page 22

Using the ShareLink Pro Software
Connecting to the ShareLink Pro
If the software is not yet connected to the ShareLink Pro device, follow these steps:
1. Open the ShareLink Pro software. The software searches for available devices on your network and
lists them.
2. Click the desired ShareLink Pro 2500 device (see the standby screen for the device name).
Figure 10. ShareLink Pro Devices List
NOTE:
• The ShareLink Pro software automatically discovers ShareLink Pro units in the same subnet as
the client device.
• If your ShareLink Pro unit is not listed, click the refresh button.
• If the device is still not listed, select the add ( ) icon. Enter the hostname or IP address as
instructed on the app screen.
3. When prompted, enter the login code and click Connect.
NOTE: The login code is shown on the standby screen (see
When connection is established, the Share screen appears (see
figure 6
on page 10).
figure 11 on the next page).
ShareLink Pro 2500 • Operation Using a Computer 14