Extron electronics ShareLink Pro 2500 User Manual page 46

Managing Login Code Settings for EDS Clients
Follow these steps to configure the login code settings for client devices (this configuration is done on the
EDS Host via PCS).
1. Open PCS v4.10.5 or greater.
2. Connect to the ShareLink Pro assigned as the EDS Host.
3. Navigate to General Settings > Display Setup tab.
4. Click View Devices (
This opens a list of all ShareLink Pro devices operating as EDS Clients (reporting to the EDS Host):
5. Use the Code Setting drop‑down list in each row to configure the code setting (None, Fixed, or
Random) for each EDS Client as desired.
To configure all EDS Clients to operate with the same Code Setting: Check the top left checkbox to
select all devices, then use the Set Code drop‑down list at the top to configure the Code Setting for all
EDS Clients at once.
) in the Enterprise Discovery Service panel.
1
1 1
ShareLink Pro 2500 • Enterprise Discovery Service 38