Extron electronics ShareLink Pro 2500 User Manual page 24

NOTE:
The following file formats are supported:
• Image: BMP, JPG, PNG, TIFF
• Video: 264, AVI, M2T, M2TS, M4V, MKV, MOV, MP4, MPG, SDP, TS
The following codecs are supported:
• Video: MPEG-2, MPEG4/XviD (Simple Profile), H.264 (Baseline, Main, High, Stereo SEI
Profile), VC1 (Simple, Main, Advanced Profile), WEBM VP8, MJPEG
VP8 (Mirror Screen feature only)
• Audio: AAC‑LC (MPEG‑2 part 7, MPEG‑4 part 3, sub part 4 and part 14,
MP4 mono or stereo audio, max 384 kbps)
PCM mono or stereo 16 kHz to 96 kHz, 16‑bit to 32‑bit
OPUS (Mirror Screen feature only)
Moderating a Presentation
The ShareLink Pro 2500 default collaboration mode (Run-Time mode) allows a user to display content as
a participant, or to control the presentation as a moderator. In this mode, everyone in the session starts as
a participant, but a user may choose to take over as moderator.
A moderator can accept or decline participants, stop shared content, and remove active participants from
a session. Follow the instructions below to moderate a presentation.
NOTE: The following instructions apply only when the ShareLink Pro is set to Run‑Time mode (the
default setting). Run‑Time mode can be disabled via PCS, and changed to either of the following
modes:
• Full Control ‑ No limitations to controls or sharing.
• Moderate ‑ Moderator manages access and sharing.
1. Click the participant icon (see figure 12,
1 1
2 2
Figure 12. ShareLink Pro Software Menu
), and select Moderator (
1
ShareLink Pro 2500 • Operation Using a Computer
) from the menu.
2
16