Extron electronics ShareLink Pro 2500 User Manual page 44

Selecting and Configuring the EDS Host
EDS can be enabled using the Product Configuration Software (PCS).
A ShareLink Pro unit must be selected to act as the EDS Host within the network. The ShareLink Pro unit
hosting the Enterprise Discovery Service acts as a central communication hub between client devices
(such as phones, tablets, and laptops) and the ShareLink Pro devices on the network.
NOTE: Depending on how many client devices are connected, EDS may affect the audio and
video performance of the ShareLink Pro device acting as the EDS Host. This should be taken into
consideration when selecting the EDS Host device.
Configuring the EDS Host in PCS
Follow these steps to enable EDS on the host device using PCS.
1. Open PCS v4.10.5 or greater.
2. Connect to the ShareLink Pro unit to be assigned as the EDS Host.
3. Navigate to General Settings > Display Setup tab.
4. Click the Host on this ShareLink Pro checkbox in the Enterprise Discovery Service panel.
5. Click OK:
ShareLink Pro 2500 • Enterprise Discovery Service 36