Extron electronics ShareLink Pro 2500 User Manual page 30

LinkLicense — Use this panel to upload the LinkLicense file to the ShareLink Pro 2500.
6
NOTE: A LinkLicense unlocks the Expo feature (streaming capability) for the ShareLink Pro 2500.
To redeem (activate) a LinkLicense, go to
instructions.
If a LinkLicense has been purchased, upload the file as follows:
a. Click Select File and browse to the LinkLicense (.ell) file on your computer.
b. Select the file, and click Add to upload the file.
Passwords — Click Edit to change any of the following passwords:
7
NOTE: The factory configured password for all accounts have been set to the device serial
number. Passwords are case sensitive. Performing a
sets the password to the defaults shown below.
•
Admin password (default: extron) — This password is used for accessing the admin page.
• Moderator password (default: moderate) — This password is required to moderate a session.
•
Participant password (default: no password) — This password is required to participate in a
session.
Enter and confirm the new password, and click Save.
Expo — Click Edit to open the Expo Settings page (see figure 16). Expo mode enables the
8
ShareLink Pro 2500 to display dynamic content as an alternative to the welcome screens (Digital
Signage LinkLicense required).
a a
b b
c c
Figure 16. Expo Settings
www.extron.com/llredeem
Reset to Factory Defaults
Lock — Click this checkbox to enable
a
the Lock feature. This prevents users
from sharing content when expo
content is playing.
Streaming Channel — Click this
b
dropdown list to select the channel that
you wish to present.
NOTE: Streaming channels can be
added or removed using Extron
PCS (see the ShareLink Pro Help
File in PCS).
Player Controls — Use this panel to
c
play, pause, and stop expo content.
Click the repeat button to automatically
replay expo content (
ShareLink Pro 2500 • Operation Using a Computer
and follow the online
(see page 7)
).
22