Extron electronics ShareLink Pro 2500 User Manual page 35

Using the ShareLink Pro App
Connecting to a ShareLink Pro Unit
Once the ShareLink Pro app is installed on the device, follow these steps to connect to the ShareLink Pro:
1. Ensure that the ShareLink Pro is powered and connected to the network.
2. Open the Wi‑Fi networks list on your device and connect to an external WAP that is on the same
network as the ShareLink Pro. Ensure that the WAP and the ShareLink Pro are wired to the same
network.
3. Open the ShareLink Pro app and select the desired unit from the list (see the standby screen to verify
the device hostname and IP address).
NOTES:
• The ShareLink Pro app automatically discovers ShareLink Pro units in the same subnet as
the client device.
• To refresh, drag down and release the list. If the unit is not listed, select the
New Connection button at the bottom and enter the hostname or IP address as instructed
on the app screen.
Figure 18. ShareLink Pro Devices List
4. When prompted, enter the login code shown on the standby screen.
5. When connection is established, the app shows the Share screen (see the next page).
ShareLink Pro 2500 • Operation Using a Mobile Device 27