Extron electronics ShareLink Pro 2500 User Manual page 27

Viewing a Presentation Using WebView
The WebView feature allows audience members to view a presentation on their computers or mobile
devices through a web browser. The presenter may broadcast the presentation so that the image shown
on the display can be viewed remotely.
NOTE: This feature can be disabled using PCS, or a password requirement can be set for using this
feature.
Audience members must follow these steps to watch the presentation:
1. Open a web browser on the computer or mobile device, and enter the IP address of the
ShareLink Pro 2500. The landing page opens as shown in
2. Click View in WebView (see
NOTE: If necessary, enable WebView in the ShareLink Pro app (see figure 19,
Presenting a Desktop Using WebShare
The WebShare feature allows users to present a computer desktop without installing the ShareLink Pro
software. Follow these steps to present using WebShare:
NOTE: NAT is required if the ShareLink Pro and the client device are on different subnets. Ensure the
client device is inside the NAT to either internet or the ShareLink Pro.
1. Open a web browser on the computer or mobile device, and enter the IP address of the ShareLink
Pro 2500. The landing page opens as shown in
2. Click the Share button on the landing page (see figure 14,
below:
3. Enter a name in the Your name field. This name is displayed to the audience during presentation.
4. If required, enter the login code in the Code field (the login code is shown on the standby screen; see
figure 6, on page 10), and enter the participant password in the Password field.
3
14, ). The presentation page opens in the web browser.
figure
1
figure
NOTE: The Code and Password fields are
shown only if they are enabled in PCS.
ShareLink Pro 2500 • Operation Using a Computer
figure 14 on the previous page.
14.
). The login page opens as shown
2
on page 29).
4
19