Extron electronics ShareLink Pro 2500 User Manual page 33

Screen sharing options
Once the ShareLink Pro is connected, the Change projection mode link is shown under the ShareLink
Pro hostname.
Click Change projection mode to see the following screen sharing options.
•
Duplicate mode is the default setting, which mirrors the Windows 10
screen onto the ShareLink Pro output display. This mode is ideal for
most projection and casting scenarios.
• Extend mode sets the ShareLink Pro output display as
a second monitor.
•
Second screen only mode sets the ShareLink Pro output display as
the primary monitor.
Disconnecting from the display
To disconnect from the display, return to the Connect panel (using the <Windows + K> shortcut) and
click the Disconnect (
1 1
Alternatively, use the <Windows + P> shortcut to open the Project panel. Click Disconnect on the
sharing status bar at the top of the screen (
2 2
NOTE: For important considerations regarding Miracast performance quality, connection methods,
configuration, and troubleshooting see
) button.
1
) or in the Project panel (
2
3 3
Miracast Connection Using the WFA 100
3
ShareLink Pro 2500 • Operation Using a Computer
).
on page 52.
25