Removing fork cross brace
31 42 028
e
Attention:
Protect painted parts from scratching: apply adhe-
sive masking tape if necessary!
1
•
Remove fasteners (2) for handlebar on left and
right from fork cross brace
•
Tie up the handlebar out of the way
•
Remove fasteners (1) for fixed tubes on left and
right from fork cross brace, while holding Allen
bolt (arrow) on fixed tube to prevent it from turn-
ing
•
Remove protective cap (arrow)
e
The fastener is secured with thread-locking com-
pound; heat if necessary, but take care not to over-
heat lines and cables!
2
•
C1310030
•
C1310050
Attention:
Slacken stud (arrow); the fork cross brace is re-
moved as a unit
Removing fork cross brace
C1310060
31.7