BMW C1 200 Repair Manual page 7

BMW Motorrad
Maintenance schedule
C1, C1 200
Customer
Job Order No.
MoDiTeC/DIS plus, read fault code memory
Change the engine oil while at regular operating temperature and replace the oil filter element
If the vehicle is ridden for short distances only or at outside temperatures below 0° C (32° F): every 3 months or after
every 3,000 km (1,800 miles) at the latest
Clean oil strainer and magnetic plug
Change transmission fluid
every 30,000 km/18,000 miles or 3 years
Inspect coolant level, top up if necessary, inspect hoses for damage, chafing points
Change the coolant
*)
every 2 years
Check valve clearances and adjust if necessary
Replacing spark plug
Replace air filter element
shorten change interval if severely dirty or dusty
Drain condensate drain hose from air manifold
Brake hoses and connections: check condition and routing
Check operation of brake system and check for leaks; repair/replace as necessary
Inspect brake fluid level at front/rear
Examine brake pads and discs for wear, renew if necessary
Renew brake fluid at least once a year
Replace variator belt
Check clutch liner, replace if necessary
Cleaning mesh filter of variator
Grease driving variator (greased version)
Check and clean driving variator (ungreased version, replace variator if necessary)
Replace complete driving variator
every 22,500 km/14,000 miles, greased version only
Check wheel bearings for play; replace if necessary
Checking that leading-link mounts are free of play
Battery: check battery acid level, if necessary add distilled water
Clean and grease the battery terminals, if necessary
Check freedom of movement of Bowden cables, check for abrasion and damage
Easy-lift mechanism:
– Check operation of mechanism and check freedom of movement
– Inspect Bowden cables for damage and signs of wear and chafing, ensuring that mechanism moves
freely without binding; check free travel and adjust as required
Check windscreen washer system; adjust nozzles if necessary and top up washer fluid in reservoir
Check windscreen wiper; replace wiper blade if necessary
Safety elements: check cable for release, belt buckles, belt strap, inertia reels, and belt locks
Check crash element for damage
Inspect shoulder bar for damage, replace deformation element if necessary
Replace fuel filter
every 37 ,500 km/22,500 miles
Only ABS: Replace seal in brake master cylinder
*)
every 30,000 km/18,000 miles
Check tightness of bolts and nuts at engine mountings and quick-release axles
Final inspection with road safety and functional check:
– Clutch engagement, steering, front and rear brake
– Condition of tyres and wheels, tyre inflation pressure
– Lights and signalling equipment, telltale and warning lights, instruments
– If necessary, test ride
*) Write up on separate invoice;
UX-VS-2, 10.2001
Licence No.
Date
*)
*)
*)
*)
*)
*)
Not part of standard service procedure
Mileage
Mechanic's signature
*)
*)
*)
BMW recommends Castrol