Checking Dimensions Of Gearbox Shafts; Checking And Measuring Variator Shaft - BMW C1 200 Repair Manual

When installing:
•
Use spacer tube, BMW No. 31 5 652, to support
bearing seat against housing and prevent break-
age
e
Attention:
Grease seats of shafts!
•
Use punch D=50 mm (1.9685 in) h=200 mm
(7.8740 in) or 36 mm (1.4173 in) socket to press
outer race of lightly oiled grooved ball bearing in
until it seats
Fluids and lubricants:
Shaft seats ....................... Klüber paste 46 MR 401
24.26
# Checking dimensions of gearbox
shafts

Checking and measuring variator shaft

C1110830
1 Measure between tips
Approved runout ............. max. 0.05 mm (0.0020 in)
2 Gearbox cover grooved ball bearing seat
Ø....................................min. 24.98 mm (0.9835 in)
3 Track in gearbox cover, shaft oil seal
Ø....................................min. 19.98 mm (0.7866 in)
4 Bearing journal, housing, grooved ball bearing
Ø....................................min. 14.98 mm (0.5898 in)
5 Bearing journal, variator, needle roller bearing
Ø........................................... 19.50 mm (0.7677 in)
6 Bearing journal, variator, grooved ball bearing
Ø....................................min. 14.97 mm (0.5894 in)
C1110840