Examine Crash Elements; (Inspections I, Ii, Iii And Iv); Check Shoulder Bar And Deformation Element; Measure Shoulder Bar - BMW C1 200 Repair Manual

Examine crash elements

(Inspections I, II, III and IV)

•
Examine foam-rubber element from below for
damage and cracks; replace if necessary
................................................... See Group 46
a
Check shoulder bar and deforma-
tion element
(Inspections I, II, III and IV)
•
Check deformation element for damage; replace
if necessary
•
Check shoulder bars for damage; replace if nec-
essary
................................................... See Group 46
a

Measure shoulder bar

x
•
Measure gap (x) between shoulder bars
•
Record result
Measurement levels
1 Runout of lower radius (arrows)
Wear data:
Gap "x"..............................................612...616 mm
............................................ (24.0945...24.2520 in)

Replacing fuel filter

(Inspection II) every 37,500 km (22,500 miles )

– Remove left service cover
13 3 010
•
Use clamp, BMW No. 13 3 010, to seal off the
fuel lines
•
Open hose clamp with pliers, BMW No. 17 5 500
•
Replace fuel filter
•
Installation is the reverse of the removal proce-
dure
•
Note specified flow direction when installing
C1460950
17 5 500
1
13 3 010
C1160090
00.63