Backrest Removal, Installation, Replacement; Head Restraint Removal, Installation, Replacement; Replacing Badge - BMW C1 200 Repair Manual

Backrest removal, installation,
replacement
– Open the seat ( 52.3)
a
•
Remove securing screws
•
Pull backrest from its bracket
When installing:
•
Installation is the reverse of the removal proce-
dure
X
Torque specification:
Attach backrest .......................................hand-tight
52.4
Head restraint removal, installation,
replacement
– Remove the backrest
C1460860
•
Remove fasteners (arrows)
•
Remove head restraint by extracting upward

51 14 050 Replacing badge

– Remove head restraint
•
Remove clips (arrows) and replace badge
•
Install new clips
X
Torque specification:
Head restraint .............................................. 21 Nm
C1520020
C1460830