Removing And Installing Coolant Pipes; Removing Engine Coolant Feed Pipe - BMW C1 200 Repair Manual

Removing and installing coolant
pipes
Removing engine coolant feed
17 12 183
pipe
– Remove front fairing panel
– Remove left and right running boards
– Remove top, left and right tunnel panels
– Remove right side trim panel
– Remove knee pad
....................................................See Group 46
a
– Draining coolant ( 17.14)
a
17 5 500
•
Remove fasteners (arrows) from frame on the
right
•
Release hose clamps (1) with pliers,
BMW No. 17 5 500
•
Remove fasteners (arrows) from frame on the left
•
Release hose clamps (2) with pliers,
BMW No. 17 5 500
•
Disconnect coolant hose (3) on left from coolant
pipe (1)
17.10
•
•
•
1
C1170080
17 5 500
1 2 3
C1170090
1
Turn the handlebars all the way to the right
Press coolant pipe (1) inward/to rear and pull off
coolant hose (2)
Pull coolant pipe (1) forward to remove
2
C1170100