BMW C1 200 Repair Manual page 240

L
Note:
On the new version of the articulated joint only one
spring is installed, on the right. The operations for
removing the left spring do not apply to the new ver-
sion!
1
•
Release eye bolt attachment(s) (1)
•
Detach spring(s) at top
2
1
•
Easy-lift mechanism - to snap the large lever into
position at the top, first move the lever all the way
to the top, then move it down
•
Remove circlips (1) and washers (4)
31.20
e
When knocking out studs - do not damage groove
for circlips!
Do not lose washers!
L
The studs are knurled on the right side!
C1460460
•
Support thrust washer (3)
•
Knock stud (2) to the right to remove
•
Remove washer (5)
3
4
C1310320
Attention:
Note:
2
5
3
C1310330