Checking Dimensions Of Crankshaft - BMW K 1100 LT Repair Manual

Measuring endplay
Install the crankshaft and measure as for radial
•
play.
Screw measuring fixture,
•
BMW No. 00 2 500, with dial gauge into the
tapped hole for the timing case cover.
Move the crankshaft from one limit to the other
•
and take the dial gauge reading.
Axial play..... 0.080...0.183 mm (0.0031...0.0072 in)
Wear limit .............................. 0.250 mm (0.0098 in)
Downloaded from www.Manualslib.com
00 2 500
manuals search engine

Checking dimensions of crankshaft

If measured bearing play was too large, the di-
•
mensions of the crankshaft must be checked.
Regrinding stages "0" and "1" are available; the
crankshaft is marked with the appropriate
number of paint spots at the bearing point. If
there are no paint spots, this indicates regrinding
stage "0".
Crankshaft dimensions.............. see Technical Data
LT110570
11.37