Omron sysmac NX Series User Manual page 426

8 Programming
Selected item
All items (text strings) Variable names, variable comments, FBD network comments, jump labels, and Jump
Variable
Instruction
Search and Replace Pane
1
Use one of the following procedures to display the Search and Replace Pane in place of the
Toolbox.
Method
Method 1 Select Search and Replace from the Edit Menu.
Method 2 Press the Ctrl + F Keys.
Method 3 Click the Search and Replace Button on the toolbar.
The Search and Replace Pane is displayed.
2
In the Search and Replace Pane, enter the text string and set the applicable search conditions,
and then click one of the buttons for search or replace.
The results of the search and replace process are displayed on the Search and Replace
Results Tab Page.
Double-click the line in the displayed results to move the focus to the corresponding location.
8-74
Scope of Searching and Replacing
instructions.
Variable names
Function block instance names
Operation
NX-series Safety Control Unit/Communication Control Unit User's Manual (Z395)