Removing The Cd-Rom/Dvd Drive - NEC DIRECTION SP B - SERVICE MANUAL 1998 Service Manual

3-18 Option Installation
3. Pull the panel away from the chassis.

Removing the CD-ROM/DVD Drive

If you need to remove the CD-ROM/DVD drive, you need to remove the accessible device
cage.
Use the following procedure to remove the accessible device cage.
Locate the screw on the front of the system between the 3.5-inch blank panel and
1.
diskette drive. Remove the screw.
Slide the cage towards the front of the system and lift it out of the unit.
2.
Figure 3-15 Releasing the Front Panel
Figure 3-16 Locating the Device Cage Screw