Dmi Event Logging Submenu; Video Configuration Submenu - NEC DIRECTION SP B - SERVICE MANUAL 1998 Service Manual

DMI Event Logging Submenu

This submenu can be used to view and modify DMI Event Logs. To enter the submenu,
highlight the DMI Event Logging field, then press
T
Event Log Capacity/Event Log Validity
These fields indicate whether space is available in the Event Log, and whether the
contents of the log are valid.
T
View DMI Event Log
If there are no event logs stored, you cannot access this log.
T
Clear All DMI Event Logs
This option clears the DMI Event Log after rebooting the system. Choose "No"
(default) or "Yes."
T
Event Logging
This option enables logging of DMI events. Choose "Disabled" or "Enabled"
(default).
T
Mark DMI Events as Read
This option is used to mark off all DMI Events as read. If necessary, press
to access the Confirmation dialog box and confirm your preference.
To return to the Advanced Menu, press

Video Configuration Submenu

This submenu can be used to configure specific video features. To enter the submenu,
highlight the field, then press
T
Palette Snooping
This option controls the ability of a primary PCI graphics controller to share a
common palette with an ISA add-in video board. Select "Enabled" or "Disabled"
(default).
T
AGP Aperture
This option specifies the aperture size for the AGP video controller.
To return to the Advanced Menu, press
Enter
.
Esc
Enter . The following option appears:
.
Esc
Setup Utility
. The following options appear:
2-11
Enter