Removing The Cd-Rom/Dvd Drive; Releasing The Front Panel; Locating The Device Cage Screw - NEC SP B-Series Service And Reference Manual

3. Pull the panel away from the chassis.

Removing the CD-ROM/DVD Drive

If you need to remove the CD-ROM/DVD drive, you need to remove the
accessible device cage.
Use the following procedure to remove the accessible device cage.
1. Locate the screw on the front of the system between the 3 1/2-inch blank
panel and diskette drive (see the following figure). Remove the screw.
3-18 Option Installation

Releasing the Front Panel

A – Two Release Tabs

Locating the Device Cage Screw

A – Device Cable Screw
B – Release Tab