Resource Configuration Submenu; Security Menu - NEC DIRECTION SP B - SERVICE MANUAL 1998 Service Manual

2-12 Setup Utility

Resource Configuration Submenu

This option allows you to reserve specific resources for use by legacy ISA devices. To enter
the submenu, highlight this field, then press
T
Memory Reservation Submenu
This option lets you configure memory blocks for use by legacy ISA devices.
When selected, the submenu displays a lists of addresses from which specific
addresses can be selected. Use the arrow (cursor) keys to highlight an upper
memory block, then press
the cursor keys, then press
To return to the Resource Configuration submenu, press
T
IRQ Reservation Submenu
This option lets you reserve specific IRQs (interrupt requests) for use by legacy
ISA devices. To do so, highlight this field, then press
(cursor) keys to highlight the specified IRQ, then press
(default) or "Reserved" with the arrow keys, then press
setting.
To return to the Advanced Menu, press
move to the Security Menu.

SECURITY MENU

The Security Menu can be used to set a user password and/or an administrator password.
A User Password controls access to the system and Setup Utility program at boot up. If the
User Password feature has been enabled, you need to enter your User password correctly
whenever you boot the system before you can use it.
An Administrator Password controls access to the BIOS and Setup Utility program. If the
Administrator Password feature has been enabled, an Administrator password must be
entered correctly before all options in the Setup Utility program are available (for example,
to disable password protection).
The Unattended Start feature allows the system to boot up and run but the keyboard and
mouse are both locked. You must enter the User Password to use the keyboard and mouse.
Enter . Select "Available" (default) or "Reserved" with
Enter
!
CAUTION: An asterisk symbol
appearing next to an option indicates that the
selected IRQ is set to conflict with another
device.
Esc
Enter . The following options are displayed:
to change the setting.
Enter
. Then press the right arrow (cursor) key to
Esc .
. Use the arrow
Enter . Select "Available"
Enter to change the