Floppy Options Submenu - NEC DIRECTION SP B - SERVICE MANUAL 1998 Service Manual

2-10 Setup Utility
T
Ultra DMA
This option sets the Ultra DMA Mode for the hard drive. This option cannot be
changed when "Auto" is selected. The options include:
Mode 0
Mode 1
Mode 2
Disabled (default).
To return to the Advanced Menu, press

Floppy Options Submenu

This submenu can be used to configure your system's diskette drives. To enter the
submenu, highlight the Floppy Options field, then press
Controller, Diskette A:, and Floppy Write Protect options.
T
Floppy Disk Controller
This option configures the system's diskette drive controller. Select "Enabled"
(default) or "Disabled."
T
Diskette A:
These fields specify the capacity and physical size of Diskette Drive A. To change
these, highlight the field for the drive, press
options:
Disabled
360KB, 5.25 inch
1.2MB, 5.25 inch
720KB, 3.5 inch
1.44/1.25 MB, 3.5 inch (default)
2.88 MB, 3.5 inch.
If you add an optional 5.25-inch diskette drive to your system, select Floppy B
and change the parameter to 1.2 MB, 5.25 inch.
T
Floppy Write Protect
This option enables or disables write protection for the diskette drive(s). Choose
the desired setting to enable or disable (default) this option.
To return to the Advanced Menu, press
Esc .
Enter
Enter and select from the following
.
Esc
. Select Floppy Disk