Table of Contents
Advertisement
When installing a DIMM module, align the notches on the module with the keys in the
memory socket, insert the module, and press in the plastic locking clips.
Power Supply Removal
Remove the power supply as follows.
1.
Remove the system access cover as previously described.
Label and unplug the power cable attached to the system board.
2.
3.
Label and unplug the power cables from all installed devices.
4.
At the back of the system unit, remove the two screws securing the power supply
to the system unit (see Figure 5-10).
Figure 5-9 Removing a DIMM
Disassembly and Reassembly
5-9
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the DIRECTION SP B - SERVICE MANUAL 1998 and is the answer not in the manual?
Questions and answers