Storage Device Installation; Removing The Front Panel; Removing The Cd-Rom/Dvd Drive - NEC DIRECTION L Service Manual

3-18 Option Installation

Storage Device Installation

The following subsections describe how to install 3 1/2-inch and 5 1/4-inch devices. The
installation procedures include:
T

removing the front panel

T

removing the CD-ROM/DVD drive

T
installing a 3 1/2-inch device
T
installing a 5 1/4-inch device
T
replacing the front panel.
Removing the Front Panel
Use the following procedure to remove the front panel.
1. Locate the two plastic tabs at the front of the chassis. They are indicated by two
arrows engraved on the chassis.
2. Press down on the two tabs and press in a third tab at the end of the panel to
release the panel (see Figure 3-14).
3. Pull the panel away from the chassis.
Removing the CD-ROM/DVD Drive
If you need to remove the CD-ROM/DVD drive, you need to remove the accessible device
cage.
Use the following procedure to remove the accessible device cage.
Figure 3-14 Releasing the Front Panel