Front Panel Removal - NEC DIRECTION SP B - SERVICE MANUAL 1998 Service Manual

Front Panel Removal

Remove the front panel from the system unit as follows.
Locate the two plastic tabs at the front of the chassis. They are indicated by two
1.
arrows engraved on the chassis.
2. Press down on the two tabs and press in a third tab at the end of the panel to
release the panel (see Figure 5-2).
3. Pull the panel away from the chassis.
Figure 5-1 Removing a Board
Figure 5-2 Releasing the Front Panel
Disassembly and Reassembly 5-3