Vlan Table Configuration - SMC Networks 6724L2 - annexe 1 Management Manual

VLAN Table Configuration

Use this screen to create a new VLAN or modify the settings for an
existing VLAN.
Port
VLAN
1
Page :
<OK>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Description
VLAN The ID for the VLAN currently displayed.
Range: 1-4094
Port Port entries may be marked as:
- : (Normal) Uses GVRP to determine port membership.
S : (Static) Adds port as a static entry. GVRP protocol is
disabled.
R : (Registration Fixed) Adds port as a static entry. GVRP
protocol messages are still forwarded through this port.
X : (Forbidden) Disables GVRP for this VLAN on the specified
port.
If a removed port is no longer assigned to any other group as
an untagged port, it will automatically be assigned to VLAN
group 1 as untagged.
Notes: 1. Use the <Next Page> and <Prev Page> buttons to scroll
through the table.
2. To display a specific page, set the page number in the
Page field and select <Apply>.
3. To modify a VLAN group, highlight the entry in the table
and select Enter. To add a VLAN group, select <Add>.
VLAN Menu: VLAN Table Configuration
=========
1
12345678901234567890123456
SSSSSSSSSSSSSSSSSSSSSSSSSS
1 <Apply>
<Prev Page>
D
EVICE
2
Total: 1
<Next Page>
C M
ONTROL ENU
-: Normal
S: Static
R: Reg. Fixed
X: Forbidden
Pages
<Add>
2-47