Configuring The Static Multicast Address Table - SMC Networks 6724L2 - annexe 1 Management Manual

Configuring the Static Multicast Address Table

The Static Multicast Address Table can be used to assign a
destination MAC address (and the corresponding ports) to the
VLAN group used for a specific multicast service. Static multicast
addresses are never aged out, and traffic with these addresses can
be forwarded only to ports specified in this table.
Parameter
MAC Address
VLAN
Port
Notes: 1. To assign a destination MAC address to one or more
ports, enter its address and the corresponding VLAN,
select the required ports, and then press Apply.
2. To delete an address, press the edit icon ( ) for the
required entry, and then press Delete.
3. To modify an address, press the edit icon ( ) for the
required entry, make any necessary changes, and then
press Apply.
Description
The destination MAC address for a multicast service.
MAC address that you enter must consist of twelve
hexadecimal digits with no dashes and no spaces.
The VLAN corresponding to this multicast service.
The ports to which this multicast traffic can be forwarded.
D C
EVICE ONTROL
M
ENU
The
3-29