Static Unicast Address Table - SMC Networks 6724L2 - annexe 1 Management Manual

W I
EB NTERFACE

Static Unicast Address Table

The Static Unicast Address Table can be used to assign the MAC
address for a host device to a specific port on this switch. Static
unicast addresses are never aged out, and cannot be learned by
another port. If any packets with a source address specified in this
table enter another port, they will be dropped. The Static Unicast
Address Table is described in the following figure and table.
Parameter
MAC Address
Port
Notes: 1. To assign an address to a specific port, enter it in the
2. To delete an address, press the edit icon ( ) for the
3. To modify an address, press the edit icon ( ) for the
3-28
Description
The MAC address of a host device attached to this switch.
The MAC address consists of twelve hexadecimal digits
with no dashes and no spaces.
The port to which the host device is attached.
MAC Address field, select the corresponding port, and
press Apply.
required entry, and then press Delete.
required entry, make any necessary changes, and then
press Apply.