Parameter
Root Cost
Root Port
Configuration Changes The number of times the Spanning Tree has been
Topology Up Time
Displaying the Current STA for Ports
The parameters shown in the following figure and table are for
port STA Information.
Parameter
Type
Description
The path cost from the root port on this switch to
the root device.
The number of the port on this switch that is
closest to the root. This switch communicates
with the root device through this port. If there is
no root port, then this switch has been accepted
as the root device of the Spanning Tree network.
reconfigured.
The time since the Spanning Tree was last
reconfigured.
Description
Shows port type as:
100BASE-TX:
100BASE-FX-MM: 100BASE-FX (multimode)
100BASE-FX-SM: 100BASE-FX (singlemode)
1GBase-SX:
1GBase-LX:
1GBase-T:
M
ONITORING THE
10BASE-T / 100BASE-TX
1000BASE-SX (multimode)
1000BASE-LX (singlemode)
1000BASE-T
S
WITCH
3-53