Configuring Global Bridge Settings - SMC Networks 6724L2 - annexe 1 Management Manual

Configuring Global Bridge Settings

The following figure and table describe bridge configuration for
STA, GMRP, GVRP, priority threshold, and address aging time.
Parameter
Spanning Tree Enabled Enable this parameter to participate in a STA
Bridge Priority 32,768
Hello Time
Default Description
compliant network.
Bridge priority is used in selecting the root
device, root port, and designated port. The
device with the highest priority becomes the
STA root device. However, if all devices have the
same priority, the device with the lowest MAC
address will then become the root device.
Enter a value from 0 - 65535.
Remember that the lower the numeric value, the
higher the priority.
2 Time interval (in seconds) at which the root
device transmits a configuration message.
The minimum value is 1.
The maximum value is the lower of 10 or [(Max.
Message Age / 2) -1].
D C
EVICE ONTROL
M
ENU
3-31