Configuring STA for Ports
The following figure and table describe port STA configuration.
Spanning Tree Port Configuration (Port 1-12)
================================
-------------------------------------------------------
<Apply>
Use <TAB> or arrow keys to move. <Enter> to select.
Parameter
Default
Type
Priority
128
Port
Type
1
100TX
2
100TX
3
100TX
4
100TX
5
100TX
6
100TX
7
100TX
8
100TX
9
100TX
10
100TX
11
100TX
12
100TX
<OK>
<Cancel>
Description
Shows port type as:
100TX
100BASE-FX_MM: 100BASE-FX (multimode)
100BASE-FX_SM: 100BASE-FX (singlemode)
1GBase-SX:
1GBase-LX:
1GBase-T:
Defines the priority for the use of a port in the
STA algorithm. If the path cost for all ports on a
switch are the same, the port with the highest
priority (that is, lowest value) will be configured
as an active link in the Spanning Tree. Where
more than one port is assigned the highest
priority, the port with lowest numeric identifier
will be enabled. The range is 0 - 255.
D
EVICE
Priority
Cost
128
19
128
19
128
19
128
19
128
19
128
19
128
19
128
19
128
19
128
19
128
19
128
19
<Prev Page>
10BASE-T / 100BASE-TX
1000BASE-SX (multimode)
1000BASE-LX (singlemode)
1000BASE-T
C
M
ONTROL
ENU
FastForwarding
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
<Next Page>
2-41