W
I
EB
NTERFACE
Management Setup Menu
After initially logging onto the system, you can use this menu to
configure access rights. You should set user names and passwords
(User Configuration). Remember to record them in a safe place.
You should also set the community string which controls access to
the onboard SNMP agent via in-band management software (SNMP
Configuration). The items provided by the Management Setup
Menu are described in the following sections.
Menu
Network Configuration
Serial Port Configuration
SNMP Configuration
User Configuration
TFTP Download
Configuration File
3-12
Description
Configures the switch's IP parameters.
Sets communication parameters for the serial
port, including baud rate, console timeout,
and screen data refresh interval.
(See "Configuring the Serial Port" on page 3-6.)
Activates authentication failure traps, and
configures communities and trap managers.
Sets the user names and passwords for
system access.
Downloads new version of firmware to
update your system (in-band).
Saves or restores configuration data based
on the specified file.