Configuring The Serial Port - SMC Networks 6724L2 - annexe 1 Management Manual

W I
EB NTERFACE
Parameter
Link Status
Speed Status
Duplex Status
Flow Control Status Shows the flow control type in use. Flow control can
VLAN ID

Configuring the Serial Port

If you are having difficulties making an out-of-band console
connection to the serial port on the switch, you can display or
modify the current settings for the serial port through the Web
agent. Click on the serial port icon in the switch image to display
or configure these settings, as shown below.
3-6
Description
Indicates if the port has a valid connection to an
external device.
Indicates the current port speed.
Indicates the port's current duplex mode.
eliminate frame loss by "blocking" traffic from end
stations connected directly to the switch.
The VLAN ID assigned to untagged frames received
on this port. Use the PVID (page 3-36) to assign ports
to the same untagged VLAN.