W
I
EB
NTERFACE
Main Menu
Using the onboard Web agent, you can define system parameters,
manage and control the switch, and all its ports, or monitor
network conditions. The interface screen includes the main menu
on the left side, the menu bar beneath the image of the switch,
and a list of commands beneath the menu bar. The following table
briefly describes the selections available from this program.
Menu
System Information Menu
System Information
Switch Information
Management Setup Menu
Network Configuration Configures the switch's network parameters.
Serial Port
Configuration
SNMP Configuration
User Configuration
TFTP Download
Configuration File
Device Control Menu
Layer 2 Menu
Bridge Menu
3-8
Description
Provides basic system description, including
contact information.
Shows hardware/firmware version numbers,
power status, and expansion modules used in
the switch.
Sets communication parameters for the serial
port, including baud rate, console timeout, and
screen data refresh interval.
Activates authentication failure traps, configures
community access strings and trap managers.
Sets the user names and passwords for system
access.
Downloads new version of firmware to update
your system (in-band).
Saves or restores configuration data based on
the specified file.
Configures port communication mode, mirror
ports, port trunking, and static addresses.
Configures GMRP and GVRP for the bridge, as
well as Spanning Tree settings for the global
bridge or for specific ports.