User Log-in Configuration
Use the User Configuration menu to restrict management access
based on specified user names and passwords. There are two user
types, Administrator and Guest. Only the Administrator has write
access for parameters governing the SNMP agent. You should
therefore assign a user name and password to the Administrator as
soon as possible, and store it in a safe place. (If for some reason
your password is lost, or you cannot gain access to the System
Configuration Program, enter "ResetSystem" for the user name,
with no password.) The parameters shown on this screen are
indicated in the following figure and table.
Parameter
User Name
Access Right ADMIN: Read/Write for all screens.
Console
Telnet
HTTP
User Configuration
==================
User Name
guest
admin
<Add>
Use <TAB> or arrow keys to move. <Enter> to select.
Description
Specifies a user authorized management access to the
switch via the console, Telnet or HTTP.
GUEST: Read Only for all screens.
Authorizes management via the console.
Authorizes management via Telnet.
Authorizes management via HTTP (i.e., a Web browser).
M
Access Right Console
GUEST
DISABLED
ADMIN
ENABLED
<OK>
S
ANAGEMENT
ETUP
Telnet
DISABLED
ENABLED
M
ENU
HTTP
ENABLED
ENABLED
2-21