Configuring Port Parameters - SMC Networks 6724L2 - annexe 1 Management Manual

C I
ONSOLE NTERFACE

Configuring Port Parameters

Use the Port Configuration menu to display or set communication
parameters for any port or module on the switch, including
administrative status, auto-negotiation, default communication
speed and duplex mode, as well as flow control in use.
Port Link
Status
-------------------------------------------------------------------
1 On
2 Off
3 Off
4 Off
5 Off
6 Off
7 Off
8 Off
9 Off
10 Off
11 Off
12 Off
<Apply>
Use <TAB> or arrow keys to move, <Space> to scroll options.
2-28
Layer 2 Menu: Port Configuration
============
Admin Auto
Status Negotiate Type
ENABLED ENABLED
ENABLED ENABLED
ENABLED ENABLED
ENABLED ENABLED
ENABLED ENABLED
ENABLED ENABLED
ENABLED ENABLED
ENABLED ENABLED
ENABLED ENABLED
ENABLED ENABLED
ENABLED ENABLED
ENABLED ENABLED
<OK> <Cancel>
(Port 1-12)
Default Current
Type
10HDX 100TX-FDX
10HDX 10HDX
10HDX 10HDX
10HDX 10HDX
10HDX 10HDX
10HDX 10HDX
10HDX 10HDX
10HDX 10HDX
10HDX 10HDX
10HDX 10HDX
10HDX 10HDX
10HDX 10HDX
<Prev Page> <Next Page>
Flow Jack
Control Type
Off RJ-45
Off RJ-45
Off RJ-45
Off RJ-45
Off RJ-45
Off RJ-45
Off RJ-45
Off RJ-45
Off RJ-45
Off RJ-45
Off RJ-45
Off RJ-45